Hi everyone…here is the next in my ongoing series of metal detector tests on the same deep silver dime. Up to bat is the Fisher F75 SE. So far, this one knocks it out of the park as “best” at giving me a “DIG ME!” signal on the dime. Like I’ve said before though, lots of variables to consider from ground moisture to undetectable RF noise.
Similar Posts
A look at First Texas Products at the IWA and Outdoor Classics Show
I found this on a fellow hobbyists site. I’m sure he won’t mind me sending traffic his way. https://hobby-detecting.com/fisher-teknetics-news-from-iwa-2018-novelties-photos/
Turn the Discrimination Down by Charlie Pearsall
Avoid the temptation to muzzle your F-75 too severely. At first I was running a discrimination mask of 55 with nickels notched in and I might get to 34 or 35 on the sensitivity in default or bottlecap mode. Now…
Fisher F5 Long Review (features breakdown)
I’ve had a lot of questions about the innovative F5 over the past few months. This is a feature break down I did that was posted on Kellyco’s site. Hopefully you’ll find it useful Fisher F5 Field Test Mark Ellington…
Teknetics Omega Review and 11 inch DD coil
*I prepared this Omega Review quite a while back, but held it while I field tested the new 11″ DD coil too… so this review will be for both products: The Teknetics Omega and the optional 11″ DD coil.* Mark…
Discrimination Mode "Sensitivity" and "Depth" in Single-Frequency VLF Metal Detectors
*Used with permission of Fisher Labs* Some metal detectors are “more sensitive” than others, and “how deep” a particular metal detector can detect a specific metal object depends on many variables. “Air test sensitivity” refers to the maximum repeatable detection…
Metal Detector Engineer Dave Johnson’s wits & wisdoms
I’ve long been a fan of the work of Dave Johnson. He has been the mind behind many, many popular metal detectors including; White’s MXT, Shadow X5, the Fisher CZ series, Teknetics T2, Fisher F75, etc., etc. Dave not only…
