Category Archives for "Teknetics"

1 Teknetics G2 on a deep silver dime

I’m planning to do a series of metal detector demos on this same dime before I dig up my test garden to move to a new house.  It was originally buried about 7 or so years ago.  First up is the Omega G2…  Interestingly, the G2 is designed to be a “gold detector” or in other words, for gold prospecting.  It has found a huge following in the world of relic hunting due to its great depth on low conducting targets (lead, brass and gold)  The G2 operates at 19 kHz (higher frequency typically means more sensitivity to lower conductor metals)

When I first tested the G2, I figured there was no way it would be a good coin shooter due to the frequency.  I was actually quite wrong!  It even hits the deep silver dime, as you’ll see in the video.  Comments and questions are welcome!

20 Teknetics Eurotek Pro Review

Teknetics Eurotek Pro Review
2014
Mark Ellington
www.detectorstuff.com

Intro –

OLYMPUS DIGITAL CAMERAYou know, the Eurotek Pro kind of frustrates me! No, no…not because it has any problems . …but, instead , because it performs so blasted well while being so inexpensive ! I mean, I have quite a few much higher priced detectors that can’t do what this little fella does. Sure, it doesn’t have a lot of the features found on high-enders like backlight, notches, etc. But what it does bring to the table is the best performance I’ve found in ferreting out non-ferrous targets that are surrounded by iron.

Continue reading

Ethics and the art of recovery

*reprinted with permission of First Texas Products*

ETHICS AND THE ART OF RECOVERY
First Texas Products takes pride in the industry we serve, and ask you to join us in observing and promoting ethical and legal detecting practices, and in supporting dealers and organizations that do the same.

Continue reading

Teknetics G2 Review

Teknetics G2 review

Mark Ellington
www.detectorstuff.com

“In the Spring a young man’s fancy lightly turns to thoughts of love”. For the not-so-young man (me), in the Fall my fancy turns to thoughts of metal detecting.  The Teknetics G2 arrived just in time to tickle my fancy!  (read more…)

Continue reading

Electrical Interference Essay by First Texas Lead Engineer Dave Johnson

Electrical Interference

First Texas Products & Fisher Labs August 2009

Dave Johnson, Chief Designer @ FTP & Fisher

Dave Johnson, Chief Designer @ FTP & Fisher

Because of the high sensitivity of modern metal detectors coupled with the proliferation of sources of electromagnetic interference, you are likely to encounter electrical interference at times during the use of your metal detector. It is important that you recognize electrical interference when present, and take appropriate measures to deal with it. This will prevent you from giving up on a worthwhile site unnecessarily, or from sending in for a repair a machine which is working properly.

Symptoms of electrical interference

Electrical interference can cause a metal detector to “chatter” spontaneously, to lose sensitivity for no apparent reason, or to cause periodic audio “wobble” or slow waves of spontaneous sound. What you’ll hear will depend on what model of metal detector you’re using, what operating mode you’re using it in, how you have the adjustments set, and what the source of the electrical interference is. The most common manifestation is spontaneous chatter.

All metal detectors are susceptible to electrical interference, but they vary in what kinds of electrical interference affect them. In a given environment some metal detectors may be affected by electrical interference whereas others may not.

Two metal detectors of the same model in the same environment may be affected differently, because of minor differences in operating frequency or because the controls have been adjusted differently.

Common sources of electrical interference

Common sources of electrical interference include: overhead electric power lines, underground power lines, other metal detectors, telephone lines carrying electronic data, computer systems, electric fences, old CRT-based televisions, cell phones, thunderstorms, fluorescent lights, metal vapor lamps, military aircraft with electronic warfare countermeasures turned on, electric motors, VLF military communications systems, and automobile ignition systems. It will sometimes be the case at home, in the showroom, or in an urban environment that there are several different sources of electrical interference present simultaneously.

Continue reading

3 Teknetics Omega Review and 11" DD coil

*I prepared this Omega Review quite a while back, but held it while I field tested the new 11″ DD coil too… so this review will be for both products: The Teknetics Omega and the optional 11″ DD coil.*

Mark Ellington

Detectorstuff.com

OmegafaceAs most of you know, I am a big fan of the Fisher F5! The F5 blew me away with the “control” I had over how I wanted to hunt…and its amazing flexibility to handle various soil and radio noise pollution situations. However, as much as I love the F5 and despite its growing “cult” following, the Engineers at First Texas knew there was even more potential in the basic electronic platform from F5. The always amazing Dave Johnson wanted to create a machine that exceeded the performance of the F5 and simplified the controls. (One thing for which I’m very thankful…. Dave Johnson is NEVER satisfied with status quo!).

When I was given the chance to field test the Teknetics Omega 8000, I jumped all over it! I knew it grew from lessons learned on the F5, so expectations were high. The Omega did not disappoint .

Continue reading

3 Information on the new Teknetics Omega- Engineer Dave Johnson

Dave Johnson

Dave Johnson

*Reprinted by permission of First Texas*

Posted originally on American Relic Hunters Official Teknetics Forum

Hello! and, Omega

Posted By: dave johnson
Date: Friday, 13 February 2009, at 1:10 p.m.

Hello, this is my first forum post on this website. Some of y’all I recognize from other venues.

Since the Teknetics Omega is in the process of being released to production, there will be a lot of curiosity about it. Most of the questions will relate to features and performance in the field. There’s no need for me to go into those matters, since other people will quickly fill in the details. What follows here is a bit of information which is probably better coming direct from engineering department.

Once the Omega gets into people’s hands, it’ll become obvious that there is some sort of relationship between the Tek Omega, and several earlier Fisher and Bounty Hunter products. Here’s what that relationship is.

Continue reading

1 Teknetics Delta 4000 Review

Teknetics Delta 4000 Review

Mark Ellington

www.detectorstuff.com

*Review based on prototype version…subject to change!*

(click on images to zoom)


The Teknetics T2 has developed quite a cult-like following since its release! With good reason…It is powerful, lightweight and innovative. It is chock full of useful features that appeal to advanced users in this wonderful hobby.

The Teknetics name has long been synonymous with performance…and that legacy is continued with the launch of the new Teknetics Delta 4000. Lead Engineer on the Delta is John Gardiner. He has had a hand in many recent metal detector releases, including the Fisher F75 and F70. He was backed up by Jorge A. Saad (see my Fisher F5 review for more on him) who wrote the core software code. The legendary Dave Johnson designed the hardware and is overall Lead Engineer for the Teknetics line of metal detectors.

p1030285deltaface

Teknetics Delta 4000 Face

Continue reading