mark
Forum Replies Created
-
Posts
-
Miss Mary did good!
Very nice!!!
Dave
Super Moderator 
Posts: 3,074 Thanks Given: 165 Thanks Received: 340 in 295 posts Joined: Sep 2009 Reputation: 6 Warning Level: 0% Post: #42 | RE: Tips and tricks Here's one Ian and Eileen reminded me about Travel the road less traveled. OK I know it sounds like the reverse of what we should do but keep in mind the high traffic areas today weren't the same as they were even a couple of years ago. I've seen this happen allot, hunting a field, beach where ever. The easily accessed areas are hunted over and over again, than one guy goes into the brush, on the side of a hill, and one of my personal favorites the vertical edge of a cut. At a group beach hunt I sponsored, so I didn't hunt...just watched, I saw something that had really stuck with me. The top was wide, flat and soft, there was a two foot cut at the high tide line with a two to three foot steep slope below to a wide, hard bottom to the water. We had 8 or 9 hunters there for about three hours. One of the requests was to make drag marks so we could tell what was and wasn't hunted. When the meet was over the top was heavily covered, the bottom was really hit hard, the steep slope had a few passes over it from a turning point in a grid but the upper slope and vertical cut was almost untouched. Since that day I've always made a point to hunt the hard to get to upper edge and run my coil along the vertical edge. I can't say it's been fantastic for finds but I can say I've pulled my share of otherwise missed targets. If ya can't find me, your looking in the wrong place.[img alt=[Image: pirate.gif]]http://www.freesmileys.org/smileys/smiley-merv/pirate.gifdraaiorgel
Super Moderator [img height=85 width=110]https://detectorstuff.com/forum1/uploads/avatars/avatar_214.gif?dateline=1351393537[/img] Posts: 1,030 Thanks Given: 657 Thanks Received: 248 in 185 posts Joined: Nov 2010 Reputation: 5 Warning Level: 0% Post: #41 | RE: Tips and tricks My best tip is to stick with the machine of your choice for at least 2-3 years. This will give you time to really get to know it and all the different sounds it can make. Then and only then you will become a really good hunter. The problem with most learners is impatience to match people who've had their machines for years. The bad news is it doesn't happen in a few days, a few weeks. or even a few months. If you keep changing machines you have to start from the very beginning again. Every make of machine has it's own sounds and quirks, and will take a long time to understand it. Ian n Eileen. HH.Eu_citzen
Rock nerd [img height=125 width=150]https://detectorstuff.com/forum1/uploads/avatars/avatar_30.jpg?dateline=1330117119[/img] Posts: 210 Thanks Given: 9 Thanks Received: 60 in 44 posts Joined: Oct 2009 Reputation: 2 Warning Level: 0% Post: #40 | RE: Tips and tricks A simple way to set maximum sensitivity on the white's bullseye pinpointer: 1/ Locate the target and dig. 2/ Put the "rod" (that detects the metal) on the ground* and start twisting the sensitivity until it starts ringing/vibrating. *Ground should be free of targets 3/ Lower it just so it stops ringing/vibrating 4/ search for the target (5/) If you think your pinpointer is unstable, turn down the sensitivity just a little and try again. It might be worth noting that this, if done correctly, will really make the bullseye a bit sharper then just guessing at which sensitivity to put it. It might require some testing to learn to understand how it behaves when its unstable vs stable, its not like your normal detector. If all economists were laid end to end, they would not reach a conclusion. draaiorgel
Super Moderator [img height=85 width=110]https://detectorstuff.com/forum1/uploads/avatars/avatar_214.gif?dateline=1351393537[/img] Posts: 1,030 Thanks Given: 657 Thanks Received: 248 in 185 posts Joined: Nov 2010 Reputation: 5 Warning Level: 0% Post: #39 | RE: Tips and tricks Great tips guys, keep 'em comin'. I found the stomp trick was a good one when I was learning my first machine Ace 250. But when I really got to know the machine I did it less and less. I also have a wee tip for the Garrett Pro pointer. When working in bark chips, once target had been located with coil, swept from side to side with the side of the pointer, and once on top of the target then pulled the pointer back towards me till the signal stopped, then push forward with the point to pick up the target with fingers only. Kinda like PPn with the concentric coil to get it on the front tip. Ian n Eileen. HH.tmanly
TOM IN SC [img height=79 width=80]https://detectorstuff.com/forum1/uploads/avatars/avatar_193.jpg?dateline=1291579210[/img] Posts: 131 Thanks Given: 0 Thanks Received: 1 in 1 posts Joined: Oct 2010 Reputation: 1 Warning Level: 0% Post: #37 | RE: Tips and tricks The Garrett Pro Pointer has a depth of around 2". When pinpointing and the depth is 2" or less use the pinpointer to located the exact position of the target. If the target is around 3" , you can use the side of the probe, Slide the side of the barrell over the ground and you will hear a churp when over the target. Just an easy way to get an extra inch out of the probe. Tom in SC[hr] The ziplock style sandwitch bag make a quick rain cover for the detector. They come in all sizes and you can get a whole box for the price of one custom cover. Stick one in your pouch for the unexpected.... Tom in SC DETECTORS I USE AT THIS TIME: MINELAB E-TRAC, RED HEAT XD-17, COINMAX II , GARRETT PRO POINTER Dave
Super Moderator Posts: 3,074 Thanks Given: 165 Thanks Received: 340 in 295 posts Joined: Sep 2009 Reputation: 6 Warning Level: 0% Post: #35 | RE: Tips and tricks I just read a couple of treasure hunting articles that had a couple of statements I thought would fit here well. They say much more than the written words. You have habitually think about how to apply what you learn from one treasure hunt to the next. Learn the secrets. But also develop the patience to keep searching. It took Mel Fischer sixteen years to find the $450 million dollar treasure cache, the "Atocha Mother Lode." marcomo
DetectorStuff Member Posts: 64 Thanks Given: 0 Thanks Received: 0 in 0 posts Joined: Dec 2009 Reputation: 0 Warning Level: 0% Post: #32 | RE: Tips and tricks Dave - Gaffers tape seems to hold up well to moisture. I haven't submerged it or anything, but I've gotten the tape plenty wet and muddy when I've detected in light rain and/or wet muddy conditions where my gloves get covered with mud. The mud and dirt cleans right off the tape with a moistened rag or whatever you care to use. Since gaffers tape is a cloth tape, it doesn't get slippery when it gets wet. The tape will hold up for a reasonably long period of time, but when it starts getting too worn, frayed or raggedy, you can just remove it cleanly from the handgrip without leaving the usual sticky residue that other tapes leave. You've got to take your time wrapping the tape and stretching it as you go so the tape stays smooth as you wrap it. It's not cheap tape, a roll costs about $15-20, but one roll will last you a long time. marcomo
DetectorStuff Member Posts: 64 Thanks Given: 0 Thanks Received: 0 in 0 posts Joined: Dec 2009 Reputation: 0 Warning Level: 0% Post: #30 | RE: Tips and tricks Some excellent stuff here. One tip I'd like to share, I use gaffers tape (it doesn't leave any sticky residue when removed) to wrap around and protect the foam handgrip of my detectors. Pull it tightly as you wrap around the grip to remove the indents and wrinkles. I put just a touch of superglue at the very end of the tape after I've wrapped it around otherwise the end will fray up fairly quickly. I know others have done the same thing using bicycle tape. Dave
Super Moderator Posts: 3,074 Thanks Given: 165 Thanks Received: 340 in 295 posts Joined: Sep 2009 Reputation: 6 Warning Level: 0% Post: #29 | RE: Tips and tricks That reminds me of another tip I know a few that didn't follow. When storing your detector, pin pointer, Walkman or anything else that takes batteries...remove the batteries and recharge them..if they are rechargeable, before storing. If ya can't find me, your looking in the wrong place.[img alt=[Image: pirate.gif]]http://www.freesmileys.org/smileys/smiley-merv/pirate.gif Eu_citzen
Rock nerd [img height=125 width=150]https://detectorstuff.com/forum1/uploads/avatars/avatar_30.jpg?dateline=1330117119[/img] Posts: 210 Thanks Given: 9 Thanks Received: 60 in 44 posts Joined: Oct 2009 Reputation: 2 Warning Level: 0% Post: #28 | RE: Tips and tricks Mark, That's to cool! Then let's continue. Since winter is soon here it might be worth mentioning that this is the perfect time to do research! Snow, frozen ground etc might keep you from detecting/digging but it certainly can't keep you from researching! So now is the time to do some research. Then during early spring get permissions. If all economists were laid end to end, they would not reach a conclusion. Dave
Super Moderator Posts: 3,074 Thanks Given: 165 Thanks Received: 340 in 295 posts Joined: Sep 2009 Reputation: 6 Warning Level: 0% Post: #25 | RE: Tips and tricks (11-12-2009 03:59 PM)Eu_citzen Wrote: Make sure the rod is adjusted so that you have the end of the coil just a few inches from your feet,
While is a comfortably up right posture, if you have to hunch over to hold the coil level to the soil you won't be swinging too long. If ya can't find me, your looking in the wrong place.[img alt=[Image: pirate.gif]]http://www.freesmileys.org/smileys/smiley-merv/pirate.gif
Eu_citzen
Rock nerd [img height=125 width=150]https://detectorstuff.com/forum1/uploads/avatars/avatar_30.jpg?dateline=1330117119[/img] Posts: 210 Thanks Given: 9 Thanks Received: 60 in 44 posts Joined: Oct 2009 Reputation: 2 Warning Level: 0% Post: #24 | RE: Tips and tricks Make sure the rod is adjusted so that you have the end of the coil just a few inches from your feet, then you have to go slowly. If all economists were laid end to end, they would not reach a conclusion. Dave
Super Moderator Posts: 3,074 Thanks Given: 165 Thanks Received: 340 in 295 posts Joined: Sep 2009 Reputation: 6 Warning Level: 0% Post: #23 | RE: Tips and tricks Take notice on the beach, when the sand is freshly brought in and the finds are few and deep most targets will be in a foot print of a walker of jogger. If ya can't find me, your looking in the wrong place.[img alt=[Image: pirate.gif]]http://www.freesmileys.org/smileys/smiley-merv/pirate.gif
